Skip links

Genflam 85 FR MB

Genflam® 85 FR MB

Code: 5904

Télécharger la fiche de données de sécurité
Télécharger la fiche de données – 5904

Genflam® FR MB is a halogenated flame retardant concentrate containing proper stoichiometrically balanced amounts of antimony trioxide and a brominated flame retardant powder. This concentrate is designed for use in halogenated and non-halogenated base compounds for extrusion or injection molding where the flame performance requires enhancement.

PRINCIPALES CARACTÉRISTIQUES

Recommended levels of addition: 5 to 10 percent by weight

PROPRIÉTÉS PHYSIQUES

Densité: 2.44 g/cm3
Physical Form: Pellets

PROPRIÉTÉS DE COMBUSTION

Indice limite d’oxygène (LOI) : 44%

CONDITIONS DE FONCTIONNEMENT SUGGÉRÉES

Extrusion (ratio L/D) : 20:1 or 24:1
Ratio comparatif : 2.5:1
Screen Pack: 20 mesh or none
Type de vis: High compression screw, with mixing section suggested.

TECHNIQUES DE TRAITEMENT

Genflam® 85 FR MB is supplied in free-flowing pellets and is compatible with both halogenated and non-halogenated base compounds. Typical addition levels are between 5 and 10 percent, but will depend highly on the base material used, and the level of improved flame performance needed. The material disperses easily but for higher concentrations, Gendon does suggest the use of a mixing screw to aid in complete dispersion for the maximum reproducibility of flame performance.

Produits similaires susceptibles de vous intéresser

Genflam XLPO-2

Genflam XLPO-2

Ce composé thermodurcissable à polymérisation rapide au peroxyde, à faible émission de fumée et sans halogène, a été conçu pour fournir aux fils et aux câbles un gainage ignifuge.

En savoir plus
Genfil TP BC

Genfil TP BC

Ce composé ignifuge pour câbles sans halogène a été conçu pour fournir une barrière contre l’humidité et un matériau de remplissage pour une utilisation dans les constructions sans halogène à faible émission de fumée (LZHF).

En savoir plus
GenNex EU Ins

GenNex EU Ins

Ce composé a été conçu pour faciliter le traitement au moyen d’extrudeuses normalement utilisées dans la production de fils et de câbles. Le matériau est fourni sous forme de granulés s’écoulant librement.

En savoir plus