Skip links

Genflam® XLPO-R EF

Genflam® XLPO-R EF

Code: 4513 (Black)

Download Data Sheet

Genflam® XLPO-R EF radiation cure thermoset flame retardant low smoke zero halogen compound was designed as a thermoset jacketing compound that gives excellent physical properties while processing easily in Military cable jacketing applications, for MIL-24643 and 24640.

KEY FEATURES

  • High flame retardancy
  • Good processibility
  • Uses no heavy metals or halogenated ingredients

PHYSICAL PROPERTIES

Density: 1.50 g/cm3
Tensile: 1900 psi (typical)
Elongation: 170% (typical)
Tear: 40 lbf/in (typical)
Durometer: 92 Shore A
Low Temp. Brittle Point: ‐31ºC
Deformation, 2000g: <10%@121oC

COMBUSTION PROPERTIES

Limited Oxygen Index (LOI): 42%
Acid Gas: 0.2%

HEAT AGING

7d@136ºC
Tensile Retention

94%

Elongation Retention 87%

Hot Creep @ 200ºC: <10%
Hot Set @ 200ºC: <5%

FLUID RESISTANCE

Fuel Oil 24h@100ºC Turbine Fuel JP5 24h@50ºC Hydraulic Fluid 24h@50ºC Lubricating Oil 24h@100ºC Coolanol 25 24h@25ºC
Tensile Retention 65% 80% 80% 90% 120%
Elongation Retention 100% 100% 100% 110% 60%

SUGGESTED RUNNING CONDITIONS

Extruder L/D: 15:1 or 20:1
Comp. Ratio: 1.25:1
Screen Pack: 20 Mesh or none
Screw Type: Single Flight metering, without mixing section
Feed Zone: 190ºF
Center Zone: 190-200ºF
Head/Die: 220ºF
Conductor Pre-Heat: 150ºF (recommended)

PROCESSING TECHNIQUES

Gendon’s XLPO-RMT Zero Halogen compound is designed to process easily. For best output and performance low gear ratio setting on the extruder are recommended.

Similar products that might interest you

Genflam XLPO-2

Genflam XLPO-2

This fast Peroxide Curing Thermoset Flame Retardant Low Smoke Zero Halogen Compound was designed to provide the wire and cable field with a flame resistant jacketing compound.

Learn More
Genfil TP BC

Genfil TP BC

A zero halogen flame retardant cable bedding compound that was designed as a moisture proof barrier and filler for use in Low Smoke Halogen Free (LZHF) constructions.

Learn More
GenNex EU Ins

GenNex EU Ins

This compound has been designed to process easily on standard extruders used in the production of wire and cable products. The material is supplied as free flowing pellets.

Learn More