Genflam® XLOH‐R radiation cure thermosetting flame retardant low smoke zero halogen compound was designed to provide the wire and cable field with a Radiation Curable thermoset jacketing product compound that gives excellent physical properties while processing easily. This polyolefin is designed to meet or exceed MIL 24643B and MIL 24640B military shipboard cable requirements with properly prepared cable constructions.
KEY FEATURES
- High flame retardancy
- Good processibility
- Uses no heavy metals or halogenated ingredients
PHYSICAL PROPERTIES
Density: 1.50 g/cm3
Tensile: 1750 psi (typical)
Elongation: 200% (typical)
Tear: 40 lbf/in (typical)
Durometer: 92 Shore A
Low Temp. Brittle Point: ‐37ºC
Deformation, 2000g: <10%@121ºC
COMBUSTION PROPERTIES
Limited Oxygen Index (LOI): 39%
Acid Gas: 0.2%
HEAT AGING
| 7d@136ºC | |||||
| Tensile Retention |
110% |
|
|||
| Elongation Retention | 95% | ||||
| Hot Creep @ 200ºC | <10% | ||||
| Hot Set @ 200ºC | <5% |
FLUID RESISTANCE
| IRM 902 – 18h@121ºC | Diesel – 24h@100ºC | ||
| Tensile Retention | 78% | 56% | |
| Elongation Retention | 89% | 74% |
WEATHERING
|
720 Hours under QUV Testing |
|
| Tensile Retention |
90% |
| Elongation Retention |
90% |
SUGGESTED RUNNING CONDITIONS
Extruder L/D: 15:1 or 20:1
Comp. Ratio: 1.25:1
Screen Pack: 20 Mesh or none
Screw Type: Single Flight metering, without mixing section
Feed Zone: 190ºF
Center Zone: 190-200ºF
Head/Die: 220ºF
Conductor Pre-Hear: 150ºF (recommended)
PROCESSING TECHNIQUES
Gendon’s XLOH‐R Zero Halogen compound is designed to process easily and maintain low scrap rates.
Similar products that might interest you
Genflam XLPO-2
This fast Peroxide Curing Thermoset Flame Retardant Low Smoke Zero Halogen Compound was designed to provide the wire and cable field with a flame resistant jacketing compound.
Learn More
Genfil TP BC
A zero halogen flame retardant cable bedding compound that was designed as a moisture proof barrier and filler for use in Low Smoke Halogen Free (LZHF) constructions.
Learn More
GenNex EU Ins
This compound has been designed to process easily on standard extruders used in the production of wire and cable products. The material is supplied as free flowing pellets.
Learn More