Skip links

Genflam MNT

Genflam® MNT

Code: 4303

Download Safety Data Sheet
Download Data Sheet

Genflam® MNT BK is a CV crosslinked jacket material designed specifically for Transit applications. The Genflam XLTR has been engineered for very low levels of smoke generation during combustion, yet provides excellent physical and processing properties to allow for maximum extruder output and minimize production costs.


  • High flame retardancy
  • Excellent processing
  • No heavy metals or halogens
  • Very low smoke generation
  • RoHS and REACH compliant


Density: 1.54 g/cm3
Tensile: 1700 psi (typical)
Elongation: 180% (typical)
Tear: 40 lbf/in (typical)
Durometer: 93 Shore A


Limited Oxygen Index (LOI): 42%
Acid Gas: 0.2%
Smoke Index (ASTM E662):

  • Flaming  Ds4 0
  • Flaming  Dm20 86
  • Non‐Flaming  Ds4 0
  • Non-Flaming  Dm20 239


7d@121ºC 7d@150ºC
Tensile Retention



Elongation Retention 92% 62%


IRM 902 – 18h@121ºC
Tensile Retention 67%
Elongation Retention 67%


Extruder L/D: 15:1 or 20:1
Comp. Ratio: 1.25:1
Screen Pack: 20 Mesh or none
Screw Type: Single Flight metering, without mixing section
Feed Zone: 200ºF
Center Zone: 210-230ºF
Head/Die: 260ºF
Screw Cooling: 165ºF
Die Cooling: Not recommended
Gradient Cooling: Not applicable
Color Concentrate: Not applicable


The Genflam MNT BK material has been designed to process easily on standard extruders used in the production of wire and cable products. The material has been designed to process similar to elastomeric compounds, attaining maximum output levels at relatively low shear rates. Care should be taken to ensure that screw compression ratio levels are below 1.5:1, and flow restrictions in the crosshead are kept to a minimum. Melt temperatures higher than 230oF should be avoided.

The material can be extruded using either pressure or sleeving techniques. For maximum physical properties, tooling utilizing a slight draw down ratio (1.15 to 1) can be used.

The material is supplied as free flowing pellets, packaged in sealed foil lined boxes and does not need to be dried prior to use. It is recommended that the foil liners be resealed after use to prevent outside contamination or water absorption during storage. If the material has been exposed to a high humidity environment, or the foil liner has not been sealed, it is recommended the material be dried for a minimum of 4 hours at 140oF (60 oC) in a standard desiccant style drier prior to use

Similar products that might interest you

Genflam XLPO-2

Genflam XLPO-2

This fast Peroxide Curing Thermoset Flame Retardant Low Smoke Zero Halogen Compound was designed to provide the wire and cable field with a flame resistant jacketing compound.

Learn More
Genfil TP BC

Genfil TP BC

A zero halogen flame retardant cable bedding compound that was designed as a moisture proof barrier and filler for use in Low Smoke Halogen Free (LZHF) constructions.

Learn More
GenNex EU Ins

GenNex EU Ins

This compound has been designed to process easily on standard extruders used in the production of wire and cable products. The material is supplied as free flowing pellets.

Learn More